Clean, Dark brown Faux suede chair with 8” light brown/beige legs. Comes with 3 pillows. From a non-smoking home.
30” W x 33” H x 23” L (deep)

Speedaire compressor
9 Gal capacity/ 125 PSI MAX
10.3 CFM @ 95 PSI
Good running condition

Asking $900 obo

Call Rick @ 7808260456

Selling Brand New Champion generator. 11,500 starting watts, 9200 running watts. I bought this gen couple years back when we were having power outages regularly but never ended up using it. I put oil in it but NEVER had gas in it, so it has never been started. Unit was stored in the garage, the battery was stored in the house. Unit comes with manual, battery charger, and power cord. This unit is not duel fuel. Firm at $1500.00
Thank you.

07.5-14 gmc/chev 6.5’ box in good shape no major dents or rust looking for 2500 obo
07.5-14 tailgate same color looking for 500 obo

Master Chef 2 burner 26,000 BTU Propane gas BBQ, W/ 8000 BTU side burner, electric start works, a little rusty and heat plates need to be replaced but still cooks good the way it is, smaller so good for campsite or a balcony, 42"H X 45" W X 18" D, is in good condition, Asking $40.00 OBO

Jardeg Construction is currently recruiting Journeyperson Welders with CWB to join the Integrated Constructors team at Bonnyville Fabrication Shop and work as a Direct Service Provider (contractor) WITHOUT your own Rig. The schedule is 5 days on, 2 days off rotation on day shift.

This Fabrication Shop is in Bonnyville, Alberta. There is no living out allowance or travel assistance for this position and candidates are required to drive to and from the Shop.

For over 40 years the team has been providing specialized material requirements and technical services and support for industrial construction and applications. As a longtime part of the Bonnyville and area community, we take pride in supporting and contributing to local organizations that improve and enhance community life.

As a Welder Journeyperson with CWB, you will complete fabrication and installation of process piping, structural steel and skid packages for the oil and gas industry anywhere in Alberta.

Responsibilities:

• Demonstrate knowledge of the welding equipment involved with various welding procedures.
• Gather all pipe fittings required for the drawing package.

Document heat numbers, cut pipe, prepare fittings and dlegs/trunnions.

• Prepare fittings and pipe to be tacked.
• Read and interpret Acorn & isometric drawings.
• Demonstrate thorough knowledge of metals, arc electrodes, welding gases and gas welding filter rods.
• Use welding processes such as SMAW, GMAW, FCAW, GTAW, or SAW to weld pressure piping.

Position Qualifications:

• Welder Journeyperson.
• Alberta B-Pressure Ticket.
• Tacking experience required.
• Stainless experience is an asset.
• Able to read and interpret Acorn & isometric drawings.
• Construction Safety Training Systems (CSTS-2020).
• WHMIS 2015.
• Aerial Work Platform.
• Energy Safety Canada Fall Protection.
• Class 5 Driver’s License.

Please direct interest and questions to piyush.parmar@jardeg.com.

24’ vibrashank, needs some work , call or text Randy 780-404-3665

Aluminum lift with canopy cover(not in pic ). 12 volt electric key fob. On 4 wheels. Works great. Pier also aluminum on wheels, with built- in winch to adjust height. 4 ft X 40 ft Adjustable stabilizer legs

1 ft barrel long - 1.375" Rod
1 ft barrel long - 1.250" Rod
Two of 33 1/2" barrel long - 1.250" Rod
All have 1 inch clevis pins.
Cylinders are all rebuilt.

Jardeg Construction is currently recruiting B Pressure (By Hand) Journeyperson Welders to join the Integrated Constructors team at Bonnyville Fabrication Shop and work as a Direct Service Provider (contractor) WITHOUT your own Rig. The schedule is 5 days on, 2 days off rotation on day shift.

This Fabrication Shop is in Bonnyville, Alberta. There is no living out allowance or travel assistance for this position and candidates are required to drive to and from the Shop.

For over 40 years the team has been providing specialized material requirements and technical services and support for industrial construction and applications. As a longtime part of the Bonnyville and area community, we take pride in supporting and contributing to local organizations that improve and enhance community life.

As a By-Hand Welder Journeyperson, you will complete fabrication and installation of process piping, structural steel and skid packages for the oil and gas industry anywhere in Alberta.

Responsibilities:

• Demonstrate knowledge of the welding equipment involved with various welding procedures.
• Demonstrate thorough knowledge of metals, arc electrodes, welding gases and gas welding filter rods.
• Use welding processes such as SMAW, GMAW, FCAW, GTAW, or SAW to weld pressure piping.

Position Qualifications:

• Welder Journeyperson.
• Alberta B-Pressure Ticket.
• Tacking experience required.
• Stainless experience is an asset.
• Construction Safety Training Systems (CSTS-2020).
• WHMIS 2015.
• Aerial Work Platform.
• Energy Safety Canada Fall Protection.
• Class 5 Driver’s License.

Please direct interest and questions to piyush.parmar@jardeg.com.

Paderno microwave in excellent condition. I believe it's 1.3 cubic foot and 1200 watts. Used about 1 year and only reason for selling is we moved into a new place that already has one.

2013 Coachmen Catalina 282 BHS

NOTE: Currently in Debden SK, but planning to bring home to Cold Lake soon. If you have serious interest, please reach out and let us know, as we can get it here sooner for viewing.

• Separate queen bedroom with door
• Bunks
• Dinette & couch convert to beds
• Power slide
• Power awning
• Solar system installed by previous owner
• Half ton towable
• Clean & smoke/pet free
• 28 feet long
• Second owners
• Very low highway & road use while we owned it
• No leaks

Damage:

• There is a small dent on the side of the camper,near the front compartment door. Minor and doesn't effect function (pictures in the ad).
• Leak below sink last summer which was caught immediately, PVC & fittings fully repaired/replaced and no issues since.

Everything is in good working condition, we just went for something bigger for our family.

GVWR: 3447KG (7600lbs)
Dry Weight: 5215lbs

I have incubator full of eggs. Due to hatch on the 5th of May.
Taking pre orders for chick. This hatch will be PUREBRED Partridge Chantecler-15.00 per chick, Barn yard mix- 8.00 per chick , and ducklings-10.00 each.
Book now before they are all gone!Chantecler chickens are breed for our weather, good layers, good foragers,
Phone or text 1 587 201 8807

Two seater inflatable kayak. Excellent condition used approx. 6 times.
Very stable and lightweight. Comes with 4 Scotty mounts and backpack storage bag. Does not include paddles or pump.
Text for quick response 780-201-5145

• Package of 7 commercial cow/calf pairs (Black and BWF) with calf birthdates ranging from January 16 to March 12th (2 black calves and 5 Charolais cross calves.) Four of the cows are 4 years old or younger. The other 3 cows are around 8 years old.
• Package of 7 commercial cow/calf pairs (Red, Tan & White) with calves born February 24 - March 3rd. Six of the cows are 4 years old or younger with one cow age 5. Calves are Charolais cross except for one calf that is black.
• Also have a package of 3 Purebred Charolais cows with commercial calves available if interested. (One calf is smokey, the other 2 are younger tan brockle faced calves.)
• Prefer to sell as packages, but may consider allowing pick.

Delivery may be available.
Call or text Kevin - 780-614-5959
Asking $5000 or best offer.

Two 2 month old pups to give away to loving homes. They’re playful and friendly and have been raised around kids, other dogs, kittens and cats. They’re ready for their new adventure!

Heatland Prowler
Holiday Trailer.
This unit is very clean, reason for selling is downsized to a smaller unit.
Queen Bed, full Media center with TV and DVD player. Inside - outside speakers.
Pull out sofa with Queen bed.
Stand up shower/tub
Free standing table Set.
Microwave
Lots of storage space.

Looking for a tow behind lawn dethatcher in good condition.
Please email with price. Thanks

I have a very large ikea wardrobe with 5 shelves. Similar idea to the picture. Took apart to move out of the house without taking a picture. See other pictures for color of finish. Dimensions are 94.5” tall, 23.5” deep, 39” wide. Currently disassembled and ready to go.

$1 each for pots that are not plastic. Or make me an offer for the lot.
$1 for the lot of plastic pots

Or $5 for everything.

Located Cold Lake / Bonnyville

Yamaha ef2800i inverter generator.
Runs well and very quiet
Brand new price- $2200
Your price- $800

As pictured, appears to be missing some pieces. Moving and would like gone. $75 obo. Pickup in Cold Lake South.

Looking for 5 ish maybe more depending on price. Need it for my bottle babies goats/sheep
Thanks call or txt

Set of used clubs for sale with newer Callaway bag. Driver, woods, irons, sand wedge and putter all included. Used but good condition. Grips all excellent. Everything you need to get golfing!